DIECI APOLLO compact loader line
Agile and powerful in tight spaces: lifting capacity 2.0–2.6 t, lifting height
4.35–5.68 m. Choose from diesel (Kubota / Yanmar) and
100% electric e-SMART with AC/Type-2 charging.
3 steering modes (2-wheel / crab / 4-wheel) and smooth maneuvers thanks to Soft Motion.*
Safety: EN15000, ROPS/FOPS, speed limiting functions with raised boom.*
*applies to selected models – see specification below.
2.0–2.6 t
Max. lifting capacity
4.35–5.68 m
Lifting height
20–30 km/h
Max. speed
Diesel / EV
Power source
Models and key parameters
| Parameter | APOLLO 20.4 SMART (diesel) | APOLLO 20.4 e-SMART (electric) | APOLLO 26.6 (diesel) |
|---|---|---|---|
| Max. lifting capacity | 2000 kg | 2000 kg | 2600 kg |
| Max. lifting height | 4.35 m | 4.35 m | 5.68 m |
| Max. horizontal reach | 2.57 m | — | 3.2 m |
| Max. speed | 25 km/h | 20 km/h | 30 km/h |
| Operating weight | 4300 kg | 4400 kg | 5100 kg |
| Drive / engine | Kubota 37 kW (Stage V) | 19 kW (drive) + 22 kW (hydraulics) | YANMAR 53.7 kW (Stage V) |
| Hydraulics (flow rate) | 101 l/min | — (electric Flow Sharing) | 80 l/min |
| Steering modes | 2-wheel / crab / 4-wheel | 2-wheel / crab / 4-wheel | 2-wheel / crab / 4-wheel |
| Safety | EN15000 | Overload lockouts | EN15000, “Arm too high”, Soft Motion |
| Charging / fuel | Diesel | Type-2 (Mode 3), 220V, 380–400V | Diesel |
APOLLO 20.4 e-SMART – 100% electric
Drive and charging
- Drive motor 19 kW (S2 60′); hydraulic system motor 22 kW (S3).
- LiFePO₄ battery, ECE R100 homologation.
- 3 charging sockets on board: Type-2 (Mode 3), 220 V, 380–400 V.
- Regenerative braking, battery thermal management.
Efficiency and comfort
- Low Noise pump, Adaptive Load Sensing, Flow Sharing.
- Zero emissions, low noise, simplified maintenance (no oil filters).
- Compact dimensions for work in halls, greenhouses and environmentally restricted areas.
APOLLO 20.4 SMART – detailed parameters
| Performance | |
|---|---|
| Max. lifting capacity | 2000 kg |
| Max. lifting height | 4.35 m |
| Max. horizontal reach | 2.57 m |
| Fork tilt angle | 133° |
| Breakout / tractive force | 3365 / 3177 daN |
| Allowable gradient | 56% |
| Operating weight | 4300 kg |
| Max. speed | 25 km/h |
| Engine | |
| Brand / power | Kubota 37 kW @ 2700 rpm (Stage V, DOC+DPF) |
| Cylinders / displacement | 3 / 1826 cm³, turbo, Common Rail |
| Drivetrain | |
| Type | Hydrostatic, single-speed (variable displacement pump) |
| Reverse / inching | Electrohydraulic / hydraulic pedal |
| Axles and brakes | |
| Axles / steering | 2 steered, 4 reducers / 2-wheel, crab, 4-wheel |
| Service / parking | Dry disc (rear) / manual on caliper |
| Hydraulics | |
| Pump / flow rate / pressure | Gear / 101 l/min / 25 MPa |
| Control | 4-in-1 proportional joystick |
| Fluids and tires | |
| Hydraulics (total) / fuel | 70 l / 60 l |
| Standard tires | 12×16.5″ |
| Dimensions (selected) | |
| A / B / C / D | 199 / 827 / 2250 / 458 mm |
| F / G / H | 3405 / 3534 / 1929 mm |
| L / M | 1230 / 1550 mm |
| P / Q / S / T | 1340 / 3075 / 1469 / 200 mm |
APOLLO 26.6 – detailed parameters
| Performance | |
|---|---|
| Max. lifting capacity | 2600 kg |
| Max. lifting height | 5.68 m |
| Max. horizontal reach | 3.2 m |
| Fork tilt angle | 129° |
| Breakout / tractive force | 5510 / 4400 daN |
| Allowable gradient | 40% |
| Operating weight | 5100 kg |
| Max. speed | 30 km/h |
| Engine | |
| Brand / power | YANMAR 53.7 kW (72 HP) @ 2500 rpm – Stage V / Tier 4f, DOC+DPF |
| Hydraulics | |
| Flow rate / pressure | 80 l/min / 23 MPa |
| Dimensions (selected) | |
| A / B / C / D | 280 / 985 / 2350 / 765 mm |
| F / G / H / I | 3585 / 4100 / 1980 / 860 mm |
| L / M / P / Q / S / T | 1500 / 1860 / 1330 / 3400 / 1485 / 110 mm |
Check available telescopic loaders in the Online Store
Any questions? Contact us
Leave your details — an FLT Group advisor will get back to you with an offer tailored to your needs.